When working with chainsaws, there is always no safety shortcut. Danger lurks everywhere you could be: logging in the woods, homesteading, landscaping or any other job that includes the little roaring beast. Atop the list of safety precautions is always to wear the chainsaw gloves.
In the course of your work, your hands are your greatest assets. You wouldn’t want to see them chopped off in case the chain snapped off accidentally, wouldn’t you? Well, you might argue that your hands will feel uncomfortable among other excuses, but the risks are just too much.
In the spirit of not making any shortcuts, you need to buy the best chainsaw glove that will not cave in and last you a while, and it should be comfortable too. All these form this buying guide for chainsaw gloves.
Best Chainsaw Gloves 2019
When using your chainsaw, this is one of the gloves that you might want to bring along. It gives you an added protection from unforeseen chainsaw accidents. Such protection is needed when using such a dangerous tool.
Since most of the time it is the left hand that is most susceptible to harm, it is the left-hand glove that is made to be more cut resistant. This would also be helpful as you hold the material you are working on with the left hand.
In case you are looking for gloves with spandex fabric on the back, then this one has such. The spandex allows the gloves to stretch as they are taken on or off. A softly knitted hand inlet provides comfort and keeps out debris as well.
For resistance against cuts, the palm of these gloves is made from goatskin. This material also provides a balance between functionality and comfort. Goatskin has an ability to wick away moisture from the gloves in case your palms get sweaty.
- Goatskin leather palms
- The left hand is cut resistant
- Back of gloves are made from spandex fabric
- Highly visible color included
- The logo is reflective
The Youngstown Gloves deliver you a cut-resistant chainsaw usage, which is great if you want to escape unhurt when objects come flying at your hands. And then for an assured performance, the gloves are lined with Kevlar fiber for a puncture and cut resistant glove.
Another great feature about these gloves is their non-slip reinforcement that is added to the palm. This reinforcement makes them comfortable even when handling slippery wood or any material. This outer glove material is heavy duty, making it capable of handling those heavy lifts.
Additionally, the reinforcement provides durability around the palm, thumb, and fingers. These are the most used parts of your hands. In effect, this makes the gloves more durable so that they can serve you for quite some time.
Another great feature that you might love about the gloves is that they are made to meet safety standards. The first safety standard is the [ANSI Cut Level 3], which seeks to ensure that any chainsaw gloves are cut resistant. The other one is ANSI Puncture Level 4 for resistance against sharp objects.
- Cut resistant
- Puncture resistant
- Lined with Kevlar fibers
- Heavy duty palm reinforcement
- ANSI Cut Level 3 and ANSI Puncture Level 4 safety standards
- Terry cloth sewed onto where the thumb is
These gloves are highly visible and heavy duty, which are great features if you work in places where your hands and likely to experience high impact forces, cuts from sharp objects and puncture from sharp objects.
Another great feature is that there is a lining of DuPont Kevlar on every inch of the glove to provide an additional layer of protection from puncture and cuts. To protect your fingers, thick TPR has been placed strategically on top of the hands, but still allows for free finger movements.
It is the responsibility of the thick TPR to prevent injuries to the fingers in case of an impact. To provide comfort to the fingers, 5.0mm of EVA foam has been sewn in the palm area to dampen any impacts and vibrations produced by the chainsaw.
A feature that you could also find useful is the incorporation of a high visibility coloring of lime on the exterior of the glove. This high visibility and 3M Scotchlite included on the knuckle improve the visibility of the gloves in poorly lit conditions.
- 5.0mm EVA Foam sewn into palm
- High visibility coloring
- Thick TPR
- DuPont Kevlar lining
- Puncture and cut resistant
- [ANSI/ISEA Cut Level A5] compliant
- ANSI/ISEA Puncture Level 4 compliant
As a chainsaw operator, you may need comfortable, good looking and dexterous pair of gloves to go about your daily work without fuss. First all, these gloves are designed with eight layers of Kevlar as a lining at the back of the glove for the left hand.
Another lining consists of woven Kevlar lining to arrest the chain in case it snaps and catches your hands in the midst of using the chainsaw. This lining is capable of protecting you from chain cuts as it withstands chain speeds of up to 3140 feet per minute.
With such arrest speeds, it makes these gloves EN 381: 1999 Class 0 Compliant. This compliance assures you of protection of the highest level if you need some. Another great feature about this is its anti-vibration reinforcement layer for fatigue-free operations.
Additionally, an elasticized Velcro wrist is added to the gloves to give you comfort while putting the gloves on or taking them off. This Velcro wrist also serves the purpose of keeping out any debris that might be flying around.
A water repellent and breathable membrane are used to laminate the backs of the gloves, which is great because it keeps out moisture and ensures that your hands stay dry throughout. With a goatskin leather lining the palms, wearing comfort is improved as does vibrations.
- Waterproof back layer
- Elasticized Velcro wrist
- EN 381:1999 Class 0 Chainsaw cuts compliant
- Kevlar lining
- Anti-vibration layers
These Echo Gloves have two Kevlar layers lined at the back to absorb various impacts. The reason why Kevlar is used is because of its high impact, puncture, and cut strengths. In this way, you can be assured of hand protection in case of an accident when using your chainsaw.
Another feature that you might love about these gloves is the inclusion of foam pads in the palm area. These foam paddings are meant to greatly reduce the vibrations that reach the operator’s hand from the running machine.
Natural leather made from goatskin is used to line the front of the gloves to give a firm grip. This is great because it prevents held materials from slipping under wet or sappy conditions. The goatskin also acts as a wick for removing the moisture from the gloves when sweaty.
For additional protection, the fingertips and knuckles areas have been reinforced and padded for comfort. Protection against debris is facilitated by a Velcro wrist that entirely closes the wrist area. It also serves to prevent the gloves from slipping off when you are using them.
- Double Kevlar layer at the back
- Foam pads for vibration reduction
- Goatskin leather for comfort
- Reinforced knuckles and fingertips for a firmer grip
- Velcro wrist provides a tight fit
Some Factors To Consider When Buying The Best Chainsaw Glove
When operating a chainsaw, you should never do so without having the best chainsaw gloves on. It does not matter how professional or how novice you are. The chainsaw gloves will be responsible for ensuring the safety of your sensitive hands.
When selecting one, care has to be taken to ensure that you end up with the right chainsaw gloves for the job. Otherwise, it won’t work for you. The factors listed below must be put into consideration when shopping for your new chainsaw gloves.
1. Made From Leather
When shopping for chainsaw gloves, always check to ensure that it has pure leather in its construction. This material is known for its elegance and comfort when used in the glove construction.
It is also what makes the gloves tear resistant and suitable for heavy-duty work. Therefore, the more the percentage of leather on the gloves, the more protected you are. The leather also gives you a firm grip even on wet conditions.
2. Kevlar Linings And Stitches
Kevlar is one of the strongest fabrics ever discovered and is mostly used in the manufacture of helmets and bulletproof vests. The Kevlar fabric is used to increase the tensile strength of the gloves to absorb any impacts your hand might experience.
In most of the gloves, Kevlar will be used to stitch the seams and joints to give them more strength when subjected to external forces.
3. Chainsaw Lining
The best chainsaw gloves have an inner lining on both the gloves. But in most of the cases, the lining is applied to mostly the left-sided glove because it is predominantly susceptible to the chain of the saw.
It is the responsibility of this lining to slow or even stop the chain in case the glove comes into contact with the chain. This functionality is achieved by making the lining tangle with the chain, bringing it to a halt.
4. Hydrophobic Property
There are always certain times when you will have to work in wet conditions. In such conditions, you need the gloves to stay dry on the inside for more comfortable operation.
Working with a water-logged pair of gloves is not a situation you want to find yourself in. There should be a hydrophobic treatment on the gloves to expel water and oil that may come into contact with them.
5. Good Abrasion Resistance
When sawing wood, the glove comes into contact with sharp sawdust and wood chippings all the time. This is where abrasion resistance comes in to prolong the lifespan of the gloves without it deteriorating.
As the gloves rub against the sawdust, high frictional forces have created that lead to the wear out of the gloves. This resistance determines how long the glove lasts in return.
6. EN And ANSI Safety Standards
It is always paramount that you be able to “trust your life” with the chainsaw gloves. They, therefore, have to meet the stringiest manufacturing standards to perform exceptionally. The EN safety standards that these gloves have to meet are elaborated below.
For any glove to be EN certified, it has to undergo rigorous testing and then be ratified. Besides EN, gloves for the American Market have to be compliant with the American safety regulations.
For gloves, these are some of the standards that it has to adherent to; EN 381-7, EN 420 and EN 388. EN 38-7 is meant to test how suitable gloves are at stopping chains at certain speeds. EN 388 tests the physical resistance of the glove to mechanical hazards such as abrasion, puncture, cut and tear.
In the course of your work, the gloves are bound to get dirty at some point. You would therefore need a pair or pairs of gloves that are easy to wash either by hand or machine. In this case, there exist some heavy duty types with an armor or rubber protection.
These types may deteriorate or lose their property when machine washed in the full-wash cycle. Therefore, before you buy any pair of gloves, check the wash and care instructions. If machine washing destroys its properties, then use alternative means of washing.
For things being worn, size is one of the key considerations that you will have to make. In fact, how comfortable you are going to be while wearing the gloves will depend on the fit. Do not purchase a pair of gloves that is either too big or too small for your hands.
If it is too big, it might slip when holding the chain or tress hence causing accidents in the process. A too small one will not fit you at all. Confirm your hand size, if it XS to XXL or any other size before making a purchase. You can as well try it on if the condition allows.
Every pair of gloves will differ from one another in terms of what features makes them provide ample protection. These features aim at making you accomplish tasks without any incidents. It could be Kevlar lining to make the gloves more durable, use of synthetic or leather for comfort and more protection or even anti-vibration features.
These features increase as the price goes up meaning the more you pay, the more features you get and the more usable your gloves are. There are even gloves with foam paddings in the knuckles areas to absorb the sock from impacts.
It is a well-established fact that price does not always guarantee you quality at times. Although this is on very rare occasions. You should also know that the more features and complex the gloves are, the costlier it will be as more protection is provided in the process.
So, look at the budget that you have, compare between different pairs gloves and decide on the best pair of gloves that provide you with the best protection at that price.
In this review, the Youngstown Chainsaw Gloves emerges the clear winner ahead of other chainsaw gloves in this review. It could be the best chainsaw glove currently in the market because of its compliance with various safety standards.
ANSI has certified the gloves to be cut level 3 and Puncture level 4 compliant. This means that the gloves will undoubtedly hold up when it comes into contact with sharp and pointed objects.
Another great feature that sets this product apart is the incorporation of a soft terry cloth at the top of where the thumb is. You are therefore able to wipe off any sweat or debris from your face and eyes.
This pair of gloves is lined with DuPont Kevlar to make it more resistant to cuts and punctures. These features, plus good reviews from users, make it undoubtedly the best chainsaw glove out there.
Whether a professional or an amateur chainsaw user, the best chainsaw gloves are some of the safety equipment that should never miss when setting out for your job.